Dolphin Emulator GC Controller Setup | For Mac users.

[Baeklays]

Welcome!

I'm a Mac user, and the GC Controller setup on Mac is way different from the Windows. Like different buttons are different buttons.

Make sure not to get confused:
Where to buy the GC Controller and Adapter.
GC Controller: http://www.amazon.com/Official-Nint...Controller/dp/B0017KIBAI/ref=pd_bxgy_pc_img_y
Adapter: http://www.amazon.com/gp/product/B0089NVTDM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

The setup picture. | Remember to check Background Input!

 

[Y-L]

Actually your triggers are set up wrong. L/R should be a button (the 'click' of your shoulders) while L/R analog should be the axes. Your threshold is set such that the line that it makes matches up to where the red from pushing in the shoulder buttons reach a maximum.

 

[Baeklays]

Nope as I click L and R they both became Axis, I can show you my screen as the same as I click the button.

 

[Y-L]

Nope as I click L and R they both became Axis, I can show you my screen as the same as I click the button.

Set them manually then. It interferes with proper shielding in melee.

 

[Baeklays]

I don't actually get it, basically sir.

 

[Y-L]

I don't actually get it, basically sir.

The L/R is the hard press, thus it requires a button. The reason you're getting axis is because you're pushing down as it looks for input and is getting the analog. The analog part is what needs the push down.

 

[Baeklays]

L/R is basically pressing it softly or pressing it lightly?

 

[MaxThunder]

Push L/R down until right before the click before you make it look for the input... then you press it down fully so it gets the click instead of the analog... then do what you did first for the analogs...

 

[Baeklays]

So?
I actually confused somehow.

 

[Moydow]

1. Push down until just before the trigger "clicks" and hold it there
2. In Dolphin, click on whichever of L or R you're setting (not the L/R-Analog), so it's looking for button input
3. Push the trigger down fully, so it clicks.
Dolphin should now recognise it as a digital button press instead of an axis/rotation (which refers to analogue input, if you're getting an axis for a digital input (i.e. standard buttons) you're doing something wrong). The axes are what L-Analog and R-Analog should be set to.

 

[Y-L]

Hold the triggers down right before they click then click on the L/R in Dolphin and make it click, that way it wont register an analog input.

 

[Baeklays]

I got it now..