D
Deleted member
Guest
this will be a short guide how to make and use .gpf files for the new geckOS 1.8
this guide is meant for those who want to explore the options of the new gecko OS, other people should stick with the double gct for now
this guide is meant for those who want to explore the options of the new gecko OS, other people should stick with the double gct for now
you will need:
code manager
a hex editor
geckoOS 1.8
http://www.usbgecko.com/Gecko18.zip
SD card
ASM codes need to be converted, to know how, scroll down to PART 2
PART 1
if you already have geckOS1.8 on your card you can start at 3
1. decide what codes you want to use (if you find this hard you might consider to stop reading here)
2. once you have the new geckoOS downloaded, go to the HBC folder and copy/paste the folder gecko18 to your SD card in X:\apps
3. open up your codemanager and open up the txt file with your codes
4. uncheck all codes that are direct write codes. these can be recogniced by the first two digits being either 04 or 06 (yes 02 can be a write but for now just forget that)
5. once you are left with allvthe ASM stuff, export this to your SD card (X:\codes\RSBE01.gct )
6. now check all codes you had unchecked and vice versa. you should only have the write codes selected.
7 the patch file needs to know the length of each "patch" you make. in the case of the code being 06, this is already done.
if the code is/was an 04 add 0x00000004 after the adress
8 replace all 06 and 04 's at the beginning of the code with "80" (if you come across a rare 05, replace with "81")
example:
Code:
065A9180 00000020
07000D9A 21000C00
1A001333 20000B33
16000C00 2F001C00
1800119A FF000ECC
Code:
[COLOR="Yellow"]80[/COLOR]5A9180 00000020
07000D9A 21000C00
1A001333 20000B33
16000C00 2F001C00
1800119A FF000ECC
Code:
0481CB34 C0220020
045A9340 00000000
Code:
[COLOR="yellow"]80[/COLOR]81CB34 [COLOR="Red"]00000004[/COLOR]
C0220020 [COLOR="yellow"]80[/COLOR]5A9340
[COLOR="red"]00000004 [/COLOR]00000000
10. export the codeset to a easy to find location on your pc.
11. close down the codemanager and open the hex editor.
12. open the exported gct file
13. the number you wrote down needs to be added as the very first byte. keep in mind that it needs to be in hex, so "13" would be "0D"
als okeep in mind that you don't overwrite the first byte but insert a byte.
14. "save as" or similair this as RSBE01.gpf (extension!) or RSBP01.gpf for PAL
the folder you need to store this is X:\patch (on SD card ofcourse)
15 now you can start up your wii, go to the HBC and start geckoOS 1.8
16. in the option menu
the following should be ON: SD cheats, SD file patcher.
the following should be OFF: load debugger.
17. alter the other settings as you wish and save if needed.
18 launch game
19. ??????
20 PROFIT!
PART 2
coming soon!