Phantom pwnt Dantarion (New Custom SSS + Custom Stage ID Engine Thingy)

[Mewtwo_2000]

Freezes? Is the stage randomly selected and then freezes?

It's strange, I have no problems getting the randoms, only freeze if not inserted card or bad stage ^^U

 

[camzy]

Alright I'll try again ^^

Can you choose normal maps too though?

 

[Mewtwo_2000]

I think you can choose your randoms between the normal maps, and the 9 customs will be in random aswell, but I never tried to quit them of the randoms, so I don't know if its randomness is selectable or forced for them

In normals, selection works well

 

[camzy]

Works now thanks!

 

[Jiiprah]

If I change the stage select rules to random it freezes but if I just select random on the SSS it work. Although, it has never selected a Custom Stage.

 

[masticatedmuffins]

alternate loading help

Ok I can't figure this out for the life of me and it is frustrating. Probably some minute detail but I'm not see it. My alternative onlinetraining stages no longer load. No matter what button command I use it always loads the default room.

Here's my entire code data code. The WWR portion is the last bit

46000010 00000000
44000000 005A7D00
66200043 00000000
4b415254 03000000
01000000 00000000
10000001 00000000
00000002 00000000
4d414e53 04000000
01000000 00000000
10000001 00000000
09000002 00000000
00000003 00000000
44585348 03000000
01000000 00000000
09000001 00000000
00000002 00000000
4f525048 02000000
10000000 00000000
00000001 00000000
44584752 03000000
10000000 00000000
01000001 00000000
00000002 00000000
454d424c 02000000
01000000 00000000
00000001 00000000
56494c4c 03000000
01000000 00000000
10000001 00000000
00000002 00000000
42415454 03000000
01000000 00000000
10000001 00000000
00000002 00000000
43524159 03000000
01000000 00000000
10000001 00000000
00000002 00000000
4f4c4449 03000000
01000000 00000000
10000001 00000000
00000002 00000000
4d455441 02000000
10000000 00000000
00000001 00000000
46494e41 11000000
01000000 00000000
10000001 00000000
09000002 00000000
05000003 00000000
01400004 00000000
01200005 00000000
11000006 00000000
01100007 00000000
10400008 00000000
10200009 00000000
0000000A 00000000
48414c42 03000000
01000000 00000000
10000001 00000000
00000002 00000000
4f4e4c49 07000000
10000000 00000000
01000001 00000000
09000002 00000000
05000003 00000000
01400004 00000000
01200005 00000000
00000006 00000000
00000DED FADEDEAD
E0000000 80008000

here's the list of the different pacs

STGONLINETRAINING_A.PAC
STGONLINETRAINING_B.PAC
STGONLINETRAINING_C.PAC
STGONLINETRAINING_D.PAC
STGONLINETRAINING_E.PAC
STGONLINETRAINING_F.PAC

The reason why there's only 6 pacs and a seventh line of code for WWR is so default can be said stage when no button combo is used. However everything is resulting in this stage.

The frustrating thing is that these have all worked before, only thing I did was add more stages, but nothing within this WWR set. This happened once before for my GreenGreen pacs but somehow managed to get that to work again; alas I'm at a loss for these.

See anything I'm missing? Any type of input would be greatly appreciated!!

 

[Mewtwo_2000]

I've seen the problem, its a line misscount (well, you have put decimal, not hex)

46494e41 11000000
01000000 00000000
10000001 00000000
09000002 00000000
05000003 00000000
01400004 00000000
01200005 00000000
11000006 00000000
01100007 00000000
10400008 00000000
10200009 00000000
0000000A 00000000

Change that to 0B and it should be workin now

 

[masticatedmuffins]

thanks

It works!

Strange that the error from a different stage effected the WWR. All the FD stages worked fine so I never woulda thought to look there.

Thanks!!!

 

[Yorsh]

Hello!
(I'm french so I don't speak english very well...)
I would to have sse stage (as this video : http://www.youtube.com/watch?v=aXJDGCGKQNg)
I have tested lots of codes but anyone work for me.
I'm PAL user, it's probably the problem but I 'm not sure.
Do you have a code for PAL?

 

[Mewtwo_2000]

It works!

Strange that the error from a different stage effected the WWR. All the FD stages worked fine so I never woulda thought to look there.

Thanks!!!

Not strange at all, if you had that 11, you were telling your code that the next 17 lines were part of that stage data, and that includes your last two stages (the wifi and another). So your last 2 stages weren't really included in your code

Hello!
(I'm french so I don't speak english very well...)
I would to have sse stage (as this video : http://www.youtube.com/watch?v=aXJDGCGKQNg)
I have tested lots of codes but anyone work for me.
I'm PAL user, it's probably the problem but I 'm not sure.
Do you have a code for PAL?

No code for PAL, you should get (buy) an american version of brawl and then port your save from PAL to USA versions

If you get the american version and have problems to make your pal savefile work on it so you don't lose your records (and stages, and characters), then ask me and I can teach you how to do it

 

[Yorsh]

Ok, thank's for your answer.
Can I replace a stage by a sse in PAL or anything work?

 

[masticatedmuffins]

Oh duh..

Makes sense. Didn't consider in hex; the calculator is my friend.

I dunno if this is the thread for it or if the traffic has finally been moved to a different thread, but the stage expansion code PW made, as of now you can only have 9 stages or add more? I've figured out how to change the .rel in the module if you want different stages, and how to remove some of the 9 stages if you want to, but don't know if there's an easy change of code to add more or if takes a lot more know-how.

Thanks again!

 

[Getsuei-Moon]

Can PW's code only hold 9 stages or can you change the code to where it can hold more stages like 15 or 20 stages.Or would PW have to make a new stage roster and everything ?

 

[Mewtwo_2000]

Ok, thank's for your answer.
Can I replace a stage by a sse in PAL or anything work?

You can replace whatever you want if the stage is replacing the correct stage (a final destination based sse stage must replace final destination, or another stage if you get the correct module in the module folder)

Oh duh..

Makes sense. Didn't consider in hex; the calculator is my friend.

I dunno if this is the thread for it or if the traffic has finally been moved to a different thread, but the stage expansion code PW made, as of now you can only have 9 stages or add more? I've figured out how to change the .rel in the module if you want different stages, and how to remove some of the 9 stages if you want to, but don't know if there's an easy change of code to add more or if takes a lot more know-how.

Thanks again!

Can PW's code only hold 9 stages or can you change the code to where it can hold more stages like 15 or 20 stages.Or would PW have to make a new stage roster and everything ?

I don't think so, the code is made for only 9 ID, it probably should be extended to make it work, and not sure if there are any more free ID's to make it

 

[DiamondbodySharpshooter]

If there's ever a way to extend it past 9 IDs, that'd be good for us Wifi peoples...

 

[Mit]

Anyone know the status on whether or not we'll ever be able to have specific music tracks load for custom stages? It would be a godsend. Stuff like having Fountain of Dreams work on Fountain of Dreams textured Battlefield stages, or the Venom song play on Mewtwo_2000's Venom stage.

It's not too bad right now with PW's code defaulting all music to Battlefield's soundtrack (a lot of good, generic songs to listen to), but it would set the mood so much better in certain stages if they could have the right music.

 

[Alphatron]

I'd love to see it done. It was originally part of Dant's code, but he stated that it was much harder than just loading alternate stages.

 

[robinpup]

i had a problem i add those codes and mi wii freezes using Gecko even the game frezzes on wiimote safety screen . i do not have those rel files or sometching is this my problem?

 

[camzy]

You need the .rel files but it shouldn't be freezing where you are. You must have a bad code somewhere.

 

[robinpup]

im using the code set shown in ths post http://forums.kc-mm.com/index.php?topic=4118.0 .
an also i have my own codes like no tripping, dash dance, scar jumping, shield cancel crouch cancel etc, and this code set i dont know where the .rel files go can someone helpme or give me a fixed code set ? =) .

 

[Yoshi6852]

I'm sorry but I need help.

first off what ar the .rel files?

Seccondly I tried to make a code but it froze at the Gecko screne. I think I still have the code but can someoen please make a code for the online traning center? I don't care which buttons are used for it as long as it is not "start" "B" or "A" for obious reasons. Make it have the maximum amount of stages the code allowsy. Firgureing I'll have enough information for all the stages, if someone allready did this can someone just link me to the page thx in advance.

 

[camzy]

im using the code set shown in ths post http://forums.kc-mm.com/index.php?topic=4118.0 .
an also i have my own codes like no tripping, dash dance, scar jumping, shield cancel crouch cancel etc, and this code set i dont know where the .rel files go can someone helpme or give me a fixed code set ? =) .

Read this thread from page 19 onwards.

Test out Phantom Wings' preset 9 stages and he gives instructions on how to use them too.

I'm sorry but I need help.

first off what ar the .rel files?

Seccondly I tried to make a code but it froze at the Gecko screne. I think I still have the code but can someoen please make a code for the online traning center? I don't care which buttons are used for it as long as it is not "start" "B" or "A" for obious reasons. Make it have the maximum amount of stages the code allowsy. Firgureing I'll have enough information for all the stages, if someone allready did this can someone just link me to the page thx in advance.

.rel files are module files that can be used to replace stages with other ones. They go in pf/module/. You need them if you intend to replace stages with custom ones or use Phantom Wings' custom stage expansion system.

Likewise, read from page 19 on this thread onwards.

You really need to read it for yourself to understand, because people are rarely going to give you everything you need.

 

[Arekku]

Can someone tell me what is wrong with this code?

Alternate Stage Loader Data v1.1
46000010 00000000
44000000 005A7D00
66200003 00000000
46494e41 02000000
00040000 00000000
00080001 00000000

I'm using it to load 2 different stages for final destination (only) and every time i finish a fight or try and reset it, it freezes.
edit: It also freezes on loading any other stage as well.
Note: I just want to use the ASL, not PW's extra stages.

thanks.

 

[Mewtwo_2000]

Can someone tell me what is wrong with this code?

Alternate Stage Loader Data v1.1
46000010 00000000
44000000 005A7D00
66200003 00000000
46494e41 02000000
00040000 00000000
00080001 00000000

I'm using it to load 2 different stages for final destination (only) and every time i finish a fight or try and reset it, it freezes.
edit: It also freezes on loading any other stage as well.
Note: I just want to use the ASL, not PW's extra stages.

thanks.

What about these two lines? Are they in your code?

00000DED FADEDEAD
E0000000 80008000

The code should be:

46000010 00000000
44000000 005A7D00
66200004 00000000 <- As Alphatron said, if you have the two lines, your problem is this
46494e41 02000000
00040000 00000000
00080001 00000000
00000DED FADEDEAD
E0000000 80008000

 

[Alphatron]

66200003 00000000

You forgot to add one after counting your lines of stage data. That number should be 4.

 

[Mewtwo_2000]

Yeah, that's right, I didn't notice that, I'm editing my post now xD

 

[DiamondbodySharpshooter]

Hey Dantarion, is there any way for this code to have people on Wifi get the same stage? Or at any rate, make it so that on Wifi it reads the button press?

 

[Shadrio]

Wow, I can't believe I just ran upon this. Awesome codes, Dantarion and PW. I'm pretty much a noob on all this coding business, I'll try to go with the first code in the thread for now (pretty much because I don't like 75M and I want to replace it >.>).

So yeah, I tried this code but I seem to have problems, with the freezing and the stuffs. My screen freezes when I get to the stage selection screen, so I guess I must be doing something wrong with the Code itself, so yeah, here's what I've used (I've tried two so far, both had the same problem):

1) Replacing Mario Circuit with Realm of the Falcon (STGKART_A.pac), loading it by holding the A button, and not allowing the old Mario Circuit Stage to reappear (this is my desire, to completely block off 75M with Realm of the Falcon):

Alternate Stage Loader Data v1.1
46000010 00000000
44000000 005A7D00
66200003 00000000
4b415254 01000000
01000000 00000000
00000DED FADEDEAD
E0000000 80008000

2) Replacing "Final Destination A" with Realm of the Falcon (STGFINAL_A.pac), loading it by holding the A button to initiate it, and making the Standard FD appear if I don't hold A:

Alternate Stage Loader Data v1.1
46000010 00000000
44000000 005A7D00
66200003 00000000
46494e41 01010000
01000000 00000000
00000DED FADEDEAD
E0000000 80008000

BTW, Realm of the Falcon is the Stage I want to use to replace 75M. The Mario Circuit was just a test and since it didn't work, I thought that maybe it was because Realm of the Falcon was made to be a Final Destination replacement only (I'm not sure about this yet, either, but I've read I need some sort of Module file if you want to make it replace another stage, I just found this out), and it still didn't work, so I came to the conclusion that my code was wrong somewhere...

I'd really apreciate if someone could help me here, as I'm new to the Brawl Hacking Business, and I don't know much about codes... :D

 

[Ratheronfire]

Shadrio: I'm not sure about this, but I think it's possible that your issue isn't with the code. This happened to me once, and the problem was that I had accidentially put a stage on my SD card that intentionally froze the game when it was loaded. It's probably not what happened, but it's worth a check.

If it is an issue with the code, I'm not entirely sure what would happen to make the game freeze on the stage select screen, so I can't help you there.

On another note, is the code acting a bit less than random for anyone else? Maybe I typed the code in wrong, but my game tends to select some textures more often, and others never at all.

 

[DevilKiller]

Dantarion said that he used an animation timer to create the random factor. Technically, if someone could pick a stage at the exact same time everytime they go to the stage select screen, it could be the same stage.

 

[Silent_Ocarina]

Hi. I have been having issues regarding PhantomWings' method. Here is the code set I am using:

Rumble Falls->Wifi Waiting Room
C298D528 00000003
2C060031 40820008
38C00005 60000000
90DD08C0 00000000
C26DCEE0 00000003
A37A0022 2C1B0008
40820008 3B600037
60000000 00000000 

Stage Roster Expansion System: v1.1
E0000000 80008000
04043B20 3800003A
04043B40 1C060018
04043B58 38840018
04949C8C 3884B460
04949D10 3884B460
04949E20 3884B460
04949EFC 3884B460
C294A588 00000003
A063001A 2C030040
41800008 38600000
60000000 00000000
C294A1D0 00000003
7C7D1B78 2C03FFFF
40820008 3FA0003F
60000000 00000000
04015564 48000010
2042AEB0 00000041
0442AEB0 00000000
80000000 8042AEB0
80000001 8042AEB0
60000030 00000000
8A001801 00000000
86000000 00000024
86000001 00000018
62000000 00000000
0042B34C 024B0000
80000000 8042B348
80000001 00000040
80000002 00000031
60000008 00000000
4A001000 00000000
94210001 00000000
16000004 00000010
73745F63 7573746F
6D002E72 656C0000
94010002 0000000D
86000000 00000018
86000001 00000001
86000002 00000001
62000000 00000000
80000000 8042BC18
80000001 8042B460
8A010001 00000000
0042BC18 010F0000
80000000 8042BC14
80000001 8042B560
80000002 00000031
60000008 00000000
4A001001 00000000
94210000 00000000
4A001000 00000000
16000000 00000008
43757374 6F6D3100
94010002 00000006
86000000 0000000C
86000001 00000004
86000002 00000001
62000000 00000000
E0000000 80008000


Enable Random Expansion Stages v1.1
C26B7A6C 00000005
3860001F 2C120000
41820008 3860000A
7C101800 41800008
38000001 7C800379
60000000 00000000
62000000 00000000
80000000 8042BC18
80000001 8042B460
8A010001 00000000
0042BC18 010F0000

Custom SSS:
046B8F5C 7C802378
046B8F64 7C6300AE
040AF618 5460083C
040AF68C 38840002
040AF6AC 5463083C
040AF6C0 88030001
040AF6E8 3860FFFF
040AF59C 3860000C
060B91C8 00000018
BFA10014 7CDF3378
7CBE2B78 7C7D1B78
2D05FFFF 418A0014
006B929C 0000001F
066B99D8 0000001F
00010203 04050709
080A0B0C 0D0E0F10
11141516 1A191217
0618131D 1E1B1C00
006B92A4 00000013
066B9A58 00000013
1F202122 25242326
27282A2B 2C2D2E2F
30313200 00000000
06407AAC 00000066
01010202 03030404
05050606 07070808
0909330A 0B0B0C0C
0D0D0E0E 130F1410
15111612 17131814
19151C16 1D171E18
1F19201A 211B221C
231D241E 251F2932
2A332B34 2C352D36
2F373038 3139323A
2E3BFFFF 40024101
42024301 44024501
46024701 48020000

First of all, the Rumble Falls code doesn't appear to work. The nine extra stages appear in my Melee Menu, but selecting any stage results in a freeze. I have the st_custom#.rel files as well as the STGCUSTOM#.pac files in the correct folders, if I'm not mistaken. Basically, I used PhantomWings' sample file that he provided in his post, but it does not appear to yield results. Any suggestions on how to fix this?

 

[darksamus77]

Hi. I have been having issues regarding PhantomWings' method. Here is the code set I am using:

Rumble Falls->Wifi Waiting Room
C298D528 00000003
2C060031 40820008
38C00005 60000000
90DD08C0 00000000
C26DCEE0 00000003
A37A0022 2C1B0008
40820008 3B600037
60000000 00000000 

Stage Roster Expansion System: v1.1
E0000000 80008000
04043B20 3800003A
04043B40 1C060018
04043B58 38840018
04949C8C 3884B460
04949D10 3884B460
04949E20 3884B460
04949EFC 3884B460
C294A588 00000003
A063001A 2C030040
41800008 38600000
60000000 00000000
C294A1D0 00000003
7C7D1B78 2C03FFFF
40820008 3FA0003F
60000000 00000000
04015564 48000010
2042AEB0 00000041
0442AEB0 00000000
80000000 8042AEB0
80000001 8042AEB0
60000030 00000000
8A001801 00000000
86000000 00000024
86000001 00000018
62000000 00000000
0042B34C 024B0000
80000000 8042B348
80000001 00000040
80000002 00000031
60000008 00000000
4A001000 00000000
94210001 00000000
16000004 00000010
73745F63 7573746F
6D002E72 656C0000
94010002 0000000D
86000000 00000018
86000001 00000001
86000002 00000001
62000000 00000000
80000000 8042BC18
80000001 8042B460
8A010001 00000000
0042BC18 010F0000
80000000 8042BC14
80000001 8042B560
80000002 00000031
60000008 00000000
4A001001 00000000
94210000 00000000
4A001000 00000000
16000000 00000008
43757374 6F6D3100
94010002 00000006
86000000 0000000C
86000001 00000004
86000002 00000001
62000000 00000000
E0000000 80008000


Enable Random Expansion Stages v1.1
C26B7A6C 00000005
3860001F 2C120000
41820008 3860000A
7C101800 41800008
38000001 7C800379
60000000 00000000
62000000 00000000
80000000 8042BC18
80000001 8042B460
8A010001 00000000
0042BC18 010F0000

Custom SSS:
046B8F5C 7C802378
046B8F64 7C6300AE
040AF618 5460083C
040AF68C 38840002
040AF6AC 5463083C
040AF6C0 88030001
040AF6E8 3860FFFF
040AF59C 3860000C
060B91C8 00000018
BFA10014 7CDF3378
7CBE2B78 7C7D1B78
2D05FFFF 418A0014
006B929C 0000001F
066B99D8 0000001F
00010203 04050709
080A0B0C 0D0E0F10
11141516 1A191217
0618131D 1E1B1C00
006B92A4 00000013
066B9A58 00000013
1F202122 25242326
27282A2B 2C2D2E2F
30313200 00000000
06407AAC 00000066
01010202 03030404
05050606 07070808
0909330A 0B0B0C0C
0D0D0E0E 130F1410
15111612 17131814
19151C16 1D171E18
1F19201A 211B221C
231D241E 251F2932
2A332B34 2C352D36
2F373038 3139323A
2E3BFFFF 40024101
42024301 44024501
46024701 48020000

First of all, the Rumble Falls code doesn't appear to work. The nine extra stages appear in my Melee Menu, but selecting any stage results in a freeze. I have the st_custom#.rel files as well as the STGCUSTOM#.pac files in the correct folders, if I'm not mistaken. Basically, I used PhantomWings' sample file that he provided in his post, but it does not appear to yield results. Any suggestions on how to fix this?

They have to be renamed STGONLINETRAINING.PAC
EDIT: File Patch needed or it won't load anything

 

[Fijoe]

Hi. I have been having issues regarding PhantomWings' method. Here is the code set I am using:

Rumble Falls->Wifi Waiting Room
C298D528 00000003
2C060031 40820008
38C00005 60000000
90DD08C0 00000000
C26DCEE0 00000003
A37A0022 2C1B0008
40820008 3B600037
60000000 00000000 

Stage Roster Expansion System: v1.1
E0000000 80008000
04043B20 3800003A
04043B40 1C060018
04043B58 38840018
04949C8C 3884B460
04949D10 3884B460
04949E20 3884B460
04949EFC 3884B460
C294A588 00000003
A063001A 2C030040
41800008 38600000
60000000 00000000
C294A1D0 00000003
7C7D1B78 2C03FFFF
40820008 3FA0003F
60000000 00000000
04015564 48000010
2042AEB0 00000041
0442AEB0 00000000
80000000 8042AEB0
80000001 8042AEB0
60000030 00000000
8A001801 00000000
86000000 00000024
86000001 00000018
62000000 00000000
0042B34C 024B0000
80000000 8042B348
80000001 00000040
80000002 00000031
60000008 00000000
4A001000 00000000
94210001 00000000
16000004 00000010
73745F63 7573746F
6D002E72 656C0000
94010002 0000000D
86000000 00000018
86000001 00000001
86000002 00000001
62000000 00000000
80000000 8042BC18
80000001 8042B460
8A010001 00000000
0042BC18 010F0000
80000000 8042BC14
80000001 8042B560
80000002 00000031
60000008 00000000
4A001001 00000000
94210000 00000000
4A001000 00000000
16000000 00000008
43757374 6F6D3100
94010002 00000006
86000000 0000000C
86000001 00000004
86000002 00000001
62000000 00000000
E0000000 80008000


Enable Random Expansion Stages v1.1
C26B7A6C 00000005
3860001F 2C120000
41820008 3860000A
7C101800 41800008
38000001 7C800379
60000000 00000000
62000000 00000000
80000000 8042BC18
80000001 8042B460
8A010001 00000000
0042BC18 010F0000

Custom SSS:
046B8F5C 7C802378
046B8F64 7C6300AE
040AF618 5460083C
040AF68C 38840002
040AF6AC 5463083C
040AF6C0 88030001
040AF6E8 3860FFFF
040AF59C 3860000C
060B91C8 00000018
BFA10014 7CDF3378
7CBE2B78 7C7D1B78
2D05FFFF 418A0014
006B929C 0000001F
066B99D8 0000001F
00010203 04050709
080A0B0C 0D0E0F10
11141516 1A191217
0618131D 1E1B1C00
006B92A4 00000013
066B9A58 00000013
1F202122 25242326
27282A2B 2C2D2E2F
30313200 00000000
06407AAC 00000066
01010202 03030404
05050606 07070808
0909330A 0B0B0C0C
0D0D0E0E 130F1410
15111612 17131814
19151C16 1D171E18
1F19201A 211B221C
231D241E 251F2932
2A332B34 2C352D36
2F373038 3139323A
2E3BFFFF 40024101
42024301 44024501
46024701 48020000

First of all, the Rumble Falls code doesn't appear to work. The nine extra stages appear in my Melee Menu, but selecting any stage results in a freeze. I have the st_custom#.rel files as well as the STGCUSTOM#.pac files in the correct folders, if I'm not mistaken. Basically, I used PhantomWings' sample file that he provided in his post, but it does not appear to yield results. Any suggestions on how to fix this?

You need to use the File Patch code.

 

[Silent_Ocarina]

My apologies. I should have been more specific. I only posted the Codes that didn't seem to work. I have the File Replacement Code.

I read over the instructions again, and I'm sure that my stages need to be named STGCUSTOM#.pac, which they are.

 

[camzy]

My apologies. I should have been more specific. I only posted the Codes that didn't seem to work. I have the File Replacement Code.

I read over the instructions again, and I'm sure that my stages need to be named STGCUSTOM#.pac, which they are.

Have you got the latest version?

You HAVE to have v3.5.1 or it won't work.

 

[Silent_Ocarina]

Have you got the latest version?

You HAVE to have v3.5.1 or it won't work.

Yes, I have File Replacement 3.5.1.

 

[Fijoe]

You said the Rumble Falls code didn't work...what exactly happens when you select it? It just loads normal Rumble Falls?

 

[Silent_Ocarina]

You said the Rumble Falls code didn't work...what exactly happens when you select it? It just loads normal Rumble Falls?

Yes, Rumble Falls loads as usual.

 

[Fijoe]

Yes, Rumble Falls loads as usual.

Do all your other codes work fine? I have no idea why that code wouldn't work, so maybe there's a problem with Gecko?

 

[Silent_Ocarina]

Do all your other codes work fine? I have no idea why that code wouldn't work, so maybe there's a problem with Gecko?

Yes, the rest of my codes work perfectly. My Codeset includes the File Patch Code as well as a Custom Character Select Screen Code With Alloys. I also have the usual codes such as Tags in Replays, Infinite Replays, Unrestricted Camera, etc. They worked flawlessly until I added those codes above.

Selecting any stage results in a freeze.